TOP TAG : Paperart garbage Beijing pearl cod filter butterfly,Paperfolding book Cooker tray foil Pizza bib Chinese brooch Heart Pendant cushion Seed can Mousse macro Cement bayberry button VCD Capsule biosphere hamburger gun

 

 

DIY Machine
DIY alternative U-disk
What is it? A broken USB cable? If you really think so, then in its designer's trap by ~ ^ _ ^ As title above, this is actually a U disk, a USB cable look like broken U-disk. This year, in order to attract the eye do not hesitate to sacrifice their...
Author:Time:2008-07-15 18:38:56  VIEW CONTENT...


DIY computer case made by cardboard
case...
Author:Time:2008-07-13 16:21:45  VIEW CONTENT...


DIY clock made by waste harddisk
...
Author:Time:2008-07-07 16:20:37  VIEW CONTENT...


DIY electric motor by battery and screw
Material:Screws, alkaline batteries, wire, magnet   Relying on these four things, no other tools could be achieved within 30 seconds, turn the speed of thousands of motor Done, in fact, than the preparation material is also simple...
Author:Time:2008-06-29 16:54:57  VIEW CONTENT...


DIY N mark PSP2 made by lock&lock
First of all to have a red and white machine, it is better compatible, cheap This looks like a imitation of Sega suspect, especially the card storage psp2 Dismantling this kind of thing is easy, you will see it i...
Author:Time:2008-06-29 16:16:59  VIEW CONTENT...


DIY usb extension cable
Is a brand-name all my printers use USB data cable (Figure 1), one end is the A head (rectangular) and the other side is a B head (square), as have other equipment supporting data lines, so this is the root USB data line is not of much use, just can...
Author:Time:2008-06-26 20:59:10  VIEW CONTENT...


DIY magnetic toys
As sold at the store, like floating globes, which allows objects with a magnet floating in the air, but this device combines permanent magnet and electromagnet, using a micro-controller and an IR sensor, when the house is equipped with magnet small o...
Author:Time:2008-06-23 16:58:01  VIEW CONTENT...


DIY USB fan made by CD
Material CD cut 8 equal portions, but not completely cut Bend a certain angle, using candles to make it a fixed heating Deformation is completed, kinda like the fan blades Cork plus steel shaft fan Squeezed the middle of the leaf disc...
Author:Time:2008-06-23 16:40:13  VIEW CONTENT...


Home  |  About us  |  Contact us  |  Sitemap  |  RSS
Copyright 2007 - 2010 LetusDIY.ORG -------